Converters

Product Details:

The ASHE ADM series Modbus Interface I/O modules are a range ofmicro-controller based Converters for Analog Inputs & Outputs andDigital Inputs & Outputs to RS485 Modbus Serial protocol. TheADM series instruments realize the signal acquisition betweensensor and the host DCS. The instruments are offered in a highlycompact execution, suitable for DIN Rail mounting. The RS485signal output can be offered in either Modbus RTU or ModbusTCP/IP Master-Slave protocols (to be pre-specified).The instrument can be factory configured for various types ofanalog signals, which need to be pre-specified. The instrumentsconvert the Digital and Analog signals to a 16 bit digital format. Thedata is transmitted by the Modbus RTU or the Modbus TCP/IPprotocol on RS-485 signal. The ADM series instruments areO accurate to + 0.1% full scale and has less than + 0.01% / C thermaldrift. Data transmission is done at 19200 Baud Rate.The ADM series Converters are isolated between the Power Supplyand the Digital Input to 1500 V AC, eliminates the effects of anyground loops and allows the use of the transmitter in heavyenvironmental conditions found in industrial applications.The ADM Converters are designed with both, the Modbus RTU aswell as the Modbus TCP/IP protocols (to be pre-specified), whichallow the instrument to be directly interfaced to a wide range of PLCand SCADA applications.

Product Details:

The ASHE Series ADM series Modbus Interface Converter modules are a range of microcontroller based converters for Analog inputs and outputs and Digital inputs and outputs to RS485 Modbus RTU serial protocol.

These instruments find application in signal and data acquisition between sensors and host DCS. The instruments are available in compact DIN rail mount execution. The RS485 signal output can be offered in either Modbus RTU or Modbus TCP/IP protocols.
Various types of analog Input signals can be configured, which need to be pre-specified.

The instruments convert the digital and analog signals to a 16-bit digital format. The instruments are accurate to 0.1% full scale and have less than 0.01%/^OC thermal drift. Data transmission is done at 19200 baud.

The ADM series converters are isolated between the power supply and the digital input to 1.5 KVAC which eliminates the effects of ground loops and allows the use of transmitter in industrial applications with noise-heavy environmental conditions.

Product Details: